The Blighter B303 radar scans and detects moving vehicles and persons (including 'crawlers') over a wide area and provides exceptional detection performance out to 8 km.
Detected targets are reported via wired or wireless TCP/IP network connections, allowing target recognition and identification through the automatic slew-to-cue of optional cameras or thermal imagers. Accurate positional information is reported, including target lat/long co-ordinates, range and bearing. The data bandwidth required for target output and radar control is very low.
The Blighter B303 is BSS's low cost e-scan ground surveillance radar (GSR). Blighter e-scan radars have no moving parts to wear-out, maintain or replace and offer dramatic improvements in reliability over mechanically-scanned radars. Blighter radars are all-in-one fully integrated units comprising antennas, signal processing, plot extractor, GPS and compass. Blighter radars are proven to withstand harsh environmental conditions and provide many years of maintenance free operation. The radar operates in all weather conditions and includes a built-in precipitation filter that suppresses false detections from rain or snow. Day/night 24-hour operation is fully supported.
Low-power FMCW Doppler Technology
Blighter radars incorporate a unique combination of FMCW and Doppler processing technology, ensuring unsurpassed ground clutter cancellation with the ability to detect incredibly slow movement. Radio transmission power is very low, making the radar safe for human operation and difficult to intercept (i.e. electronically covert). Power consumption is low, allowing operation from battery, vehicle or mains.
Wide Elevation Beam
In order to maximise long-range detection performance, radars are typically mounted high on a tower or on top of a hill. However, when mounted in this way, the narrow vertical elevation beam of traditional radars results in the problem of 'dead ground' close to the radar. Blighter radars benefit from having a very wide vertical elevation beam, allowing them to detect targets in the distance as well as close-up simultaneously. In complex mountainous regions, the Blighter radar's wide elevation beam also ensures that hill tops and valleys can be scanned simultaneously, without the need to physically tilt the radar. Over flat land and calm water, the wide beam also provides rapid detection of low flying manned and unmanned aircraft including planes, helicopters, UAVs, microlights and hang gliders.
– Wide-band (WB): 15.7 to 17.2 GHz
– Narrow-band (NB): 16.2 to 17.2 GHz
Target Detection Performance
– Crawling person (RCS 0.1 m²): 1.5 km (0.9 mi.)
– Walking person (RCS 1.0 m²): 3.3 km (2.1 mi.)
– Moving vehicle (RCS 30.0 m²): 8.0 km (5.0 mi.)
– Large moving vehicle (RCS 100.0 m²): 8.0 km (5.0 mi.)
Target Output & Identification
Connectivity & Software
Physical, Environmental & Reliability
* B303 radar unit (excluding lifting eye, mounting brackets, solar shield, etc.)
Errors and omissions excepted. Blighter Surveillance Systems reserves the right to modify specifications without notice. Blighter radars are protected by a number of international patents. The Blighter name is an international registered trademark.