Thermal Imaging Products

FIXED THERMAL IMAGERS

MMTI 320 Thermal Imager

The MMTI 320 is a RUGGED, miniature short-range Thermal Imager.
The MMTI 320 utilises an uncooled 17μm pitch 320 x 240 microbolometer and is available in six different lens variants.
The unit conforms to IP67 integrity, giving great protection against the elements, with connection via a single multi-pin connector. The MMTI 320 provides unparalleled image quality, for its size, weight and power and can be deployed in a number of ways.
This multi-role Thermal Imager performs numerous tasks and can give you the edge that is needed to SEE day and night.

A deployment kit is available for use with the MMTI Thermal Imager, click here for more information.

MMTI 640 Thermal Imager

The MMTI 640 is a RUGGED, miniature short-range Thermal Imager.
The MMTI 640 utilises an uncooled 17μ­m pitch 640 x 480 microbolometer, and is available in 8 different lens variants.
The unit conforms to IP67 integrity, giving great protection against the elements, with connection via a single multi-pin connector. The MMTI 640 provides unparalleled image quality, for its size, weight and power and can be deployed in a number of ways.
This multi-role Thermal Imager performs numerous tasks and can give you the edge that is needed to SEE day and night.

A deployment kit is available for use with the MMTI Thermal Imager, click here for more information.

MVTI 640 Thermal Imager

The MVTI 640 is a designed primarily as a vehicle mounted thermal short-range Thermal Imager.
The MVTI 640 utilises a VOx uncooled 17μ­m pitch 640 x 480 microbolometer resistant to solar damage, and is available in four different lens variants. The housing is constructed of Aluminium parts machined in house with multiple O ring seals and with connections via a single multi-pin military style connector. The unit conforms to IP67 integrity, giving great protection against the elements.

DFTI 640 Thermal Imager

NO IMAGE

The DFTI 640 is a discrete fixed IP Thermal Imager.
The DTTI 640 utilises an uncooled 17μ­m pitch 640 x 480 microbolometer, and is available in 8 different lens variants.
The unit consists of integrated PSU, & Managed Network switch along with the thermal imager and is a ready to go IP thermal solution.
The housing conforms to IP67 integrity, giving great protection against the elements.
The DFTI 640 has options more upto 4 thermal imagers in total. provides unparalleled image quality, for its size, weight and power and can be deployed in small hard-to-get places.

RUGG 320 Thermal Imager

The RUGG 320 is an ultra- RUGGED, short-range Thermal Imager.
The RUGG 320 utilises a VOx uncooled 17μ­m pitch 320 x 240 microbolometer resistant to solar damage, and is available in five different lens variants. The housing is constructed of Aluminium parts machined in house with multiple O ring seals and with connections via a single multi-pin military style connector. The unit conforms to IP68 integrity, giving great protection against the elements.
The RUGG 320 is low power, rela vely small and cylindrical in shape and can be deployed into small hard-to- get to places.
As part of a surveillance system, this thermal imager can give you the edge that is needed in very harsh environments to provide total protection day and night.

RUGG 640 Thermal Imager

The RUGG 640 is an ultra- RUGGED, short-range Thermal Imager.
The RUGG 640 utilises a VOx uncooled 17μ­m pitch 640 x 480 microbolometer resistant to solar damage, and is available in four different lens variants. The housing is constructed of Aluminium parts machined in house with multiple O ring seals and with connections via a single multi-pin military style connector. The unit conforms to IP68 integrity, giving great protection against the elements.
The RUGG 640 is low power, relatively small and cylindrical in shape and can be deployed into small hard-to- get to places.
As part of a surveillance system, this thermal imager can give you the edge that is needed in very harsh environments to provide total protection day and night.

MULTI-SENSOR PRODUCTS

Aquila DS Dual Sensor EO IP Surveillance System

The Liteye Aquila DS is a discrete Dual Sensor Electro-Optical IP Surveillance System, consisting of a High Resolution Thermal Imager and Megapixel Visible camera

Thermal Imager – This Imager is based on the latest Thermal Imaging technology, utilizing a VOx un-cooled 17μm pitch 640 x 480 microbolometer, resistant to solar damage, providing unparalleled image quality and is available in 8 different lens variants.

Visible Camera – This imager has a high-performance 1/2.8-type Exmor 2.13 megapixel CMOS image sensor. Incorporating STARVIS technology it achieves superb Full-HD picture quality, even in lowlight environments.
The lens has X30 optical zoom with Autofocus.
The system is ONVIF Profile S compliant for video and motion control and conforms to IP67 for deployment giving great protection against the elements. With pan and tilt movement, this high-performance, multi-sensor system is designed for day and night operations.

Aquila II EO System 640-FL

The Aquila II 640-FL is a rugged, low-profile Thermal Imaging Surveillance System

The unit employs two cameras:

Camera 1: This sensor is based on the latest Thermal Imaging technology, utilizing a VOx uncooled 17µm pitch 640 x 480 microbolometer, resistant to solar damage.
There are 8 thermal lens variants available from 90˚ HFoV at the widest to 12.4˚ HFoV at the narrowest.

Camera 2: A standard colour Sony block with X36 zoom.

This high-performance, rugged, multi-sensor system is designed for day and night operations and to survive in the harshest weather and environmental conditions, including continuous salt water spray rain, as well as direct sunlight.

Aquila II EO System 640-100M

The Aquila II EO System 640-100M is a rugged, low-profile Thermal Imaging Surveillance System
The PTZ employs two cameras:
Camera 1: This sensor is based on the latest Thermal Imaging technology, utilizing a VOx uncooled 17μm pitch 640 x 480 microbolometer, resistant to solar damage. It is ed to a 100mm Germanium high-aperture F/1.0 lens.
Camera 2: A standard colour Sony block with X36 zoom. This high-performance, rugged, multi-sensor system is designed for day and night operations and to survive in the harshest weather and environmental conditions, including continuous salt water spray or blowing sand and rain, as well as direct sunlight.

Aquila II EO System 640-100MF

The Aquila II EO System 640-100MF is a rugged, low-profile Thermal Imaging Surveillance System
The PTZ employs three cameras:
Camera 1: This sensor is based on the latest Thermal Imaging technology, utilizing a VOx uncooled 17μm pitch 640 x 480 microbolometer, resistant to solar damage. It is ed to a 100mm Germanium high-aperture F/1.0 lens.
Camera 2: A standard colour Sony block with X36 zoom.
Camera 3: The third channel provides unique situational awareness capabilities over a wide eld of view (65°) thanks to an ultra-sensitive colour day and night camera. This high-performance, rugged, multi-sensor system is designed to MIL-STD for day and night operations and to survive in the harshest weather and environmental conditions, including continuous salt water spray or blowing sand and rain, as well as direct sunlight.

Aquila II EO System 640-150Z

The Aquila II EO System 640-150Z is a rugged, low-pro le Thermal Imaging Surveillance System
The PTZ employs two cameras:
Camera 1: This sensor is based on the latest Thermal Imaging technology, u lizing a VOx uncooled 17μm pitch 640 x 480 microbolometer, resistant to solar damage. It is ed to a 25 – 150mm con nuous zoom lens.
Camera 2: A standard colour Sony block with X36 zoom. This high-performance, rugged, mul -sensor system is designed to MIL-STD for day and night opera ons in the harshest weather and environmental condi ons, including con nuous salt water spray or blowing sand and rain, as well as direct sun­ light.

Aquila II EO System 640-150ZF

The Aquila II EO System 640-150ZF is a rugged, low-profile Thermal Imaging Surveillance System
The PTZ employs three cameras:
Camera 1: This sensor is based on the latest Thermal Imaging technology, utilizing a VOx uncooled 17μm pitch 640 x 480 microbolometer, resistant to solar damage. It is ed to a 25 – 150mm continuous zoom lens.
Camera 2: A standard colour Sony block with X36 zoom.
Camera 3: The third channel provides unique situational awareness capabilities over a wide eld of view (65°) thanks to an ultra-sensitive colour day and night camera.
This high-performance, rugged, multi -sensor system is designed to MIL-STD for day and night operations in the harshest weather and environmental conditions, including continuous salt water spray or blowing sand and rain, as well as direct sunlight.

Different thermal lens options are available for the Aquila II EO System, please contact us for more information.

Liteye UK Limited
15b Field House
Earls Colne Business Park
Earls Colne, Colchester
Essex
CO6 2NS
United Kingdom
+44 (0) 1787 223972
infouk@liteye.com